SUPPORT ASSEM. 2G4125 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench As 1 Start By:
Release the system pressure.
Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06269782
Use Tooling (A) to remove oil filter (1). Refer to Operation and Maintenance Manual, "Hydraulic System Oil Filter (Hydraulic Fan Return) - Replace" for the correct removal procedure.
Illustration 2 g06269784
Disconnect harness assembly (4), hose assembly (3), and tube assembly (5).
Illustration 3 g06269786
Remove bolts (6), bolt (7), and oil filter base (8).Installation Procedure
Install the oil filter in the reverse order of removal.