SUPPORT A-HOOD 2H9799 - Caterpillar

Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact the skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Note: Before you proceed, ensure that you know the correct model of the hydraulic actuated fan.Changing the Oil on the Hub of the FX 2000 Hydraulic Actuated Fan
Illustration 1 g00920273
Rotate the hub until oil drain plug (1) is facing upward.
Remove oil drain plugs (1) and (2).
Slowly rotate the hub until oil starts to flow from oil drain plug (2). Capture the oil in a suitable container.
When the flow of oil stops, rotate the hub until the oil starts to flow again. Repeat this step until all of the oil has been removed from the hub.
See Operation and Maintenance Manual, "Hub Oil - Add" for the procedure to refill the hub with oil.