SUPPORT 3313986 - Caterpillar

Illustration 1 g02789915
Table 1
Specification for 360-5864 Track Roller Gp
Item Qty Part Specification Description
1 1 7H-3171 Pipe Plug Before assembly, apply blue Loctite 243 to the threads.
Torque to 25 3 N m (221 27 lb in).
2 2 206-9211 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Before assembly, apply a thin film of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
3 2 7F-8268 O-Ring Seal Lubricate the bore with the lubricant that is being sealed.
4 2 8E-5599 Track Roller Bearing Bore after assembly is 60.130 0.076 mm (2.3673 0.0030 inch).
5 - - Before assembly, the surfaces must be clean and free of protective coating.
- - - End play for the track roller shaft:
Minimum is 0.25 mm (0.010 inch).
Maximum is 1.25 mm (0.049 inch).