SUPPORT GP-FAN DRIVE 3473431 - Caterpillar

Table 1
Required Parts    
Quantity     Part Number     Description    
2     4P-7429     Clip    
2     7K-1181     Cable Strap    
4     116-0118     Clip    
2     225-5977     Resistor    
Illustration 1 g00956177
Use the existing hardware in order to attach one 4P-7429 Clip (2) and two 116-0118 Clips (3) to the EDC.
Disconnect the electrical connection on the EDC control from the main electrical harness. Insert 225-5977 Resistor (1) between the EDC control and the main harness. Use a 7K-1181 Cable Strap (4) in order to attach 225-5977 Resistor (1) to 4P-7429 Clip (2) .
Attach the receptacle assemblies to 116-0118 Clips (3) .
Repeat the procedure for the other auger/conveyor pump.