SUPPORT AS 3633185 - Caterpillar

Illustration 1 g06164810
Right Side of Operator Platform
(1) Blade control pedalWhen installed, blade control pedal (1) is on the right side of the operator platform. This pedal controls the operation of the blade.Blade control pedal (1) is connected to a blade control valve through a mechanical linkage. Fore and aft actuation of the pedal controls the position of the leveling blade. The control pedal returns to a center position when released. The control pedal will stay in a detent position when pressed fully forward.
Illustration 2 g06164812
Blade Control Graphic
(2) Float
(3) Lower
(4) Hold
(5) RaiseIllustration 2 shows the four positions of the blade control pedal. The positions of the blade control pedal from front to rear are as follows:
FLOAT: Push the pedal all the way forward to place the leveling blade into float detent. The leveling blade will adjust to the contour of the ground when the pedal is in the FLOAT position.
LOWER: Push the pedal forward to lower the leveling blade. The pedal will return to the HOLD position when the pedal is released. In this case, the leveling blade remains at the selected height.
HOLD: When the pedal is released from the RAISE position or from the LOWER position, the pedal returns to the HOLD position.
RAISE: Push the back of the pedal to raise the leveling blade. The pedal will return to the HOLD position when released. In this case, the leveling blade remains raised.