SUPPORT AS-RADIATOR 3967351 - Caterpillar

Illustration 15 g01513421
Remove collar (28), discs (29), and plates (30).
Illustration 16 g01513454
Remove O-ring seal (31) from collar (28).
Illustration 17 g01513473
Remove shaft (32) and swashplate (33).
Illustration 18 g01513577
Remove piston (34).
Illustration 19 g01513869
Remove balls (35) and springs (36).
Use a suitable press in order to remove bearing (37).
Illustration 20 g03353911
Use Tooling (B) in order to remove retaining ring (38).
Remove plug (39) and the O-ring seal.
Illustration 21 g01513925
Use Tooling (C) and Tooling (D) in order to remove cover (40).
Illustration 22 g01514083
Remove O-ring seal (41) and carrier assembly (42).
Illustration 23 g01515008
Use Tooling (E) in order to remove retaining rings (43).
Remove gears (44) and gear (45).
Illustration 24 g01515037
Use Tooling (F) in order to remove retaining ring (46).
Remove gear (47).
Illustration 25 g01515047
Use Tooling (E) in order to remove the retaining rings (48).
Remove gears (49).
Illustration 26 g01515073
Illustration 27 g02924025
Illustration 28 g01515110
Drill the stakes from nut (50).
Install spindle (51) and housing (52) onto Tooling (G).
Install Tooling (H) into spindle (51). Note: See Table 1 in order to determine the correct spanner wrench assembly.
Install Tooling (G) onto the bottom of Tooling (J).
Install remaining pieces of Tooling (J).
Remove nut (50).
Illustration 29 g02923856
Use Tooling (K) and a suitable press in order to remove spindle (51) from housing (52).
Illustration 30 g01515147
Remove Duo-Cone seals (53) and (54).