AVSPARE.COM
parts catalog

SUPPORT GP-MOT 3967734 - Caterpillar



3967734 SUPPORT GP-MOT Caterpillar parts SUPPORT
Rating:
11
Alternative (cross code) number:
CA3967734
396-7734
3967734
Caterpillar 3967734 SUPPORT GP-MOT

Buy SUPPORT GP-MOT 3967734 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1. Location of dimension A and the identification mark on the cylinder block.
Illustration 2. Location of View B-B and the identification mark on the cylinder head.
Illustration 3. Location of dimension B.There is also a minimum for the total of dimensions A and B. This minimum total of 418.26 mm (16.467") must be checked any time a resurfaced block deck and resurfaced cylinder head are used on the same side. This dimension is necessary to prevent piston to valve contact.
Piston projection must be considered when resurfaced cylinder blocks are used. Piston projection (the amount the pistons extend above the deck surface of the block), must be 0.43 0.46 mm (.017 .018"). This dimension is the same for new or resurfaced cylinder blocks.
The dimensions in this article can be used as a guide any time a cylinder block or head are resurfaced. Also, the original specification for flatness must still be held. This specification is 0.15 mm (.006") for the total length and a maximum of 0.08 mm (.003") for any 152.4 mm (6.00") length.


Parts support Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.