3C8525 SUPPORT AS Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8525
3C-8525
3C8525
CA3C8525
3C-8525
3C8525
Weight: 2 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195038
Turn the fuel supply valve to the OFF position.
Disconnect harness assembly (2) .
Remove fuel temperature sensor (1) .
Remove the O-ring seal from fuel temperature sensor (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01195038
Install a new O-ring seal on fuel temperature sensor (1) .
Install fuel temperature sensor (1) and tighten to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .
Turn the fuel supply valve to the ON position.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195038
Turn the fuel supply valve to the OFF position.
Disconnect harness assembly (2) .
Remove fuel temperature sensor (1) .
Remove the O-ring seal from fuel temperature sensor (1) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01195038
Install a new O-ring seal on fuel temperature sensor (1) .
Install fuel temperature sensor (1) and tighten to a torque of 20 3 N m (15 2 lb ft).
Connect harness assembly (2) .
Turn the fuel supply valve to the ON position.