3C8570 SUPPORT SEAL Caterpillar parts
Rating:
Alternative (cross code) number:
CA3C8570
3C-8570
3C8570
CA3C8570
3C-8570
3C8570
Weight: 0.95 pounds 0 kg.
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 138-7576 Link Bracket 2
C 189-0408 Shackle As 2
D 138-7575 Link Brackets 2
E - Forcing Bolt
1/2 -13 by 3 inch 2 Start By:
Remove the transmission hydraulic control valve. Refer to Disassembly and Assembly, "Transmission Hydraulic Control - Remove".
Separate the transmission and the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Separate".
Remove the speed sensor. Refer to Disassembly and Assembly, "Speed Sensor (Transmission) - Remove".
Illustration 1 g01197182
Attach Tooling (A), Tooling (B), Tooling (C) and a suitable lifting device to transmission housing (1). The weight of transmission housing (1) is approximately 1270 kg (2800 lb).
Illustration 2 g01197183
Position transmission housing (1) on suitable blocking.
Attach Tooling (D) and a suitable lifting device to transmission planetary (3). The weight of transmission planetary (3) is approximately 953 kg (2100 lb).
Remove bolts (2). Install Tooling (E), in order to remove the transmission planetary.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 138-7576 Link Bracket 2
C 189-0408 Shackle As 2
D 138-7575 Link Brackets 2
E - Forcing Bolt
1/2 -13 by 3 inch 2 Start By:
Remove the transmission hydraulic control valve. Refer to Disassembly and Assembly, "Transmission Hydraulic Control - Remove".
Separate the transmission and the torque converter. Refer to Disassembly and Assembly, "Transmission and Torque Converter - Separate".
Remove the speed sensor. Refer to Disassembly and Assembly, "Speed Sensor (Transmission) - Remove".
Illustration 1 g01197182
Attach Tooling (A), Tooling (B), Tooling (C) and a suitable lifting device to transmission housing (1). The weight of transmission housing (1) is approximately 1270 kg (2800 lb).
Illustration 2 g01197183
Position transmission housing (1) on suitable blocking.
Attach Tooling (D) and a suitable lifting device to transmission planetary (3). The weight of transmission planetary (3) is approximately 953 kg (2100 lb).
Remove bolts (2). Install Tooling (E), in order to remove the transmission planetary.