SUPPORT 4160797 - Caterpillar

Illustration 1 g01338097
(1) 295-8934 Tube As (2) 8F-4994 O-Ring Seal (3) 288-1559 Manifold As
Illustration 2 g01338164
(4) 5K-5959 O-Ring Seal (5) 7M-7273 Gasket (6) 7C-0307 Gasket (7) 4N-1918 Wound Gasket If the Coolant Line Is Connected to the Top of the Turbine Housing
Refer to Table 2, and Illustration 4 if the coolant line on the engine is connected to the rear of the 7N-3175 Manifold and if the coolant line is connected to the top of the turbine housing.
Table 2
Required Parts    
Part Numbers     Quantity    
2P-4173 Drain Cock     1    
6V-1760 Flared Elbow     1    
072-9601 Reducer     1    
111-6838 Outlet Tube Assembly     1    
111-6839 Outlet Tube Assembly     1    
006-2325 Flared Elbow     1    
031-5744 Elbow     1    
1P-0043 Flared Nut     1    
6K-4235 Union Tee     1    
8T-6765 Pipe Plug     1    
7M-7273 Gasket     1    
305-7400 Tube As (1)     1    
( 1 ) 305-7400 Tube As is used when the engine has a 102-0294 Turbocharger Gp, a 122-8043 Turbocharger Gp, or a 162-9471 Turbocharger Gp .
Illustration 3 g01352854
(8) 147-0642 Manifold (9) 5P-9436 Threaded O-Ring Plug (10) 3D-2824 O-Ring Seal
Illustration 4 g01338434
(11) 006-2325 Flared Elbow (12) 111-6838 Outlet Tube Assembly (13) 072-9601 Reducer (14) 1P-0043 Flared Nut (15) 6K-4235 Union Tee (16) 8T-6765 Pipe Plug (17) 6V-1760 Flared Elbow (18) 2P-4173 Drain Cock (19) 111-6839 Outlet Tube Assembly (20) 031-5744 Elbow (21) 7M-7273 Gasket
Remove the 2W-0379 Outlet Tube Assembly, the 001-6301 Elbow, and the 003-9163 Elbow .
Install a 7B-2176 Reducer Bushing in the turbine housing.
Illustration 4 shows the proper way to configure the cooling lines for the turbocharger.