SUPPORT AS 4362799 - Caterpillar

When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cables to the rear tow points. Install the rear tow point pins through the ends of the retaining cables.Failure to properly secure the body (bed) may result in personal injury or death.
Secure the dump body in the fully raised position and prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
Inspect the following ground straps and ground cables:
Illustration 1 g01827740
(1) Cab to frame ground
Illustration 2 g01826114
(2) Inverter cabinet to frame ground
(3) Generator to frame ground
(4) Electric retarder to frame ground
Illustration 3 g01827539
(5) Rear axle housing to frame ground
Illustration 4 g01828677
(6) Engine to frame ground
(7) Duct to frame ground (lower)
Illustration 5 g01934313
(8) Duct to frame ground (upper)
Illustration 6 g01830576
(9) Power stairs to frame ground (if equipped)
Inspect the ground straps and ground cables for any of the following conditions:
Broken wires
Worn wires
Corroded wires
Loose strands or loose wires
Damaged connections
Corroded connections
Contaminated connections
Loose connections or separation between the cable/strap and the cable/strap end
Remove the truck body retaining cable and lower the body.