SUPPORT 4417080 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean the mating surfaces of the housing for the engine oil cooler and the cylinder block.
Illustration 1 g00952614
Position the engine oil cooler (2) and new seals (5) on the housing for the engine oil cooler. Install the setscrews (7) in order to secure the engine oil cooler to the housing. Note: Do not use sealants on the gasket (1).
Position the housing for the engine oil cooler (3) and a new gasket (1) on the cylinder block. Install the setscrews (4) and the setscrews (6) in order to secure the housing for the engine oil cooler to the cylinder block.
Tighten all of the setscrews (4, 6 and 7) to the correct torque. Refer to the Torque specifications Manual, "Standard Torques for Metric Fasteners" for further information. Note: Refer to Operation and Maintenance Manual, "Refill Capacities" for the cooling system capacity and the lubrication system capacity of the engine.
Fill the cooling system with coolant. Fill the lubrication system with engine oil.