SUPPORT GP 4791447 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7573     Link Bracket     2    
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00813285
Illustration 2 g00803926
Install Tooling (A) and a suitable lifting device.
Position valve (19) in order to connect harness assemblies (20). Reposition valve (19) for installation. The weight of valve (20) is approximately 45 kg (100 lb).
Connect hose assemblies (18) .
Illustration 3 g00803837
Install bolts (17). Remove Tooling (A) and the suitable lifting device.
Illustration 4 g00803788
Connect hose assemblies (16) .
Illustration 5 g00803753
Connect hose assemblies (15) .
Illustration 6 g00803604
Connect tube assembly (11) and install bolts (14) .
Illustration 7 g00803595
Connect hose assemblies (13) .
Illustration 8 g00803359
Connect tube assemblies (11) and install bolts (12) .
Illustration 9 g00803175
Install clips (10) and bolts (9) .
Illustration 10 g00803139
Connect hose assemblies (7) onto valve (8) .
Connect harness assembly (6) .
Illustration 11 g00803137
Connect harness assemblies (4) onto actuator groups (3). Attach cable straps (5) .
Illustration 12 g00803133
Install step (1) and bolts (2) .