4N6051 SUPPORT GP-ENGINE Caterpillar parts
621R, 627B, D6C
Rating:
Alternative (cross code) number:
CA4N6051
4N-6051
4N6051
CA4N6051
4N-6051
4N6051
Weight: 0.82 pounds 0 kg.
TRACK-TYPE TRACTOR, WHEEL TRACTOR,
Number on catalog scheme:
For full view, you need register
Information:
5L5587 Springs used in the forward and reverse clutches of the Twin Disc MG514 Marine Transmission can make contact as the clutches rotate. These springs are green and they have been replaced in production and are available for parts service with new springs that are black. The part number did not change.
When a MG514 Marine Transmission is disassembled for repair the 5L5587 Springs must be inspected for signs of contact. If the springs show signs of contact they must be replaced with the new black springs.
When the clutches of a MG514 Marine Transmission are assembled, the springs of one clutch must be in alignment with the spaces between the springs in the other clutch.
A fabricated tool, see Illustration 1, can be used to hold the forward and reverse clutches in the correct position until the output gear is installed. Fabricate the tool as shown in Illustration 2 from mild steel.
Illustration 1. Fabricated tool installed to position clutches.
Illustration 2. Dimensions to fabricate tool.
When a MG514 Marine Transmission is disassembled for repair the 5L5587 Springs must be inspected for signs of contact. If the springs show signs of contact they must be replaced with the new black springs.
When the clutches of a MG514 Marine Transmission are assembled, the springs of one clutch must be in alignment with the spaces between the springs in the other clutch.
A fabricated tool, see Illustration 1, can be used to hold the forward and reverse clutches in the correct position until the output gear is installed. Fabricate the tool as shown in Illustration 2 from mild steel.
Illustration 1. Fabricated tool installed to position clutches.
Illustration 2. Dimensions to fabricate tool.
Caterpillar SIS machinery equipment:
Caterpillar SIS
3306 VEHICULAR ENGINE 10K10056-11939 (MACHINE) »
4N-6051
SUPPORT GP-ENGINE
627B TRACTOR 14S00662-01079 (MACHINE) POWERED BY 3306 ENGINE »
4N-6051
SUPPORT GP-ENGINE
627B TRACTOR 14S00662-01079 (MACHINE) POWERED BY 3306 ENGINE »
4N-6051
SUPPORT GP-ENGINE
627B TRACTORS / POWER SHIFT / 14S01080-UP (MACHINE) POWERED BY 3306 ENGINE »
4N-6051
SUPPORT GP-ENGINE
3306 VEHICULAR ENGINE 10K07953-11939 (MACHINE) »
4N-6051
SUPPORT GP-ENGINE
627B WHEEL TRACTOR 34V00001-UP (MACHINE) »
4N-6051
SUPPORT GP-ENGINE
621R TRACTOR / POWER SHIFT / 12Y00001-UP (MACHINE) POWERED BY 3306 ENGINE »
4N-6051
SUPPORT GP-ENGINE
Caterpillar parts catalog:
Parts support Caterpillar catalog:
3345444
SUPPORT GP-CATALYST
G3520B
G3520B
7W6410
SUPPORT GP-ENGINE-FRONT
3204, 916, 926, 926A, 943, 953, G916, G926, IT18, IT18B, IT28, IT28B
3204, 916, 926, 926A, 943, 953, G916, G926, IT18, IT18B, IT28, IT28B
2604642
SUPPORT GP-MOTOR
CB-14
CB-14
4N5239
SUPPORT GP-ENGINE
225, 225D, 229, 229D, D4D
225, 225D, 229, 229D, D4D
4E2517
SUPPORT GP-SEAT
824C, 825C, 826C, 950F, 966F, 980F, 980F II
824C, 825C, 826C, 950F, 966F, 980F, 980F II
3579752
SUPPORT GP-AFTERCOOLER
C27, C32, TH48-E70
C27, C32, TH48-E70
5N1933
SUPPORT GP-POWER TAKE-OFF
3126, 3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31...
3126, 3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31...
3649779
SUPPORT GP-RADIATOR
966M, 966M XE, 972M, 972M XE
966M, 966M XE, 972M, 972M XE
1353104
SUPPORT GP-AIR INLET
854G, 992G, D11N, D11R
854G, 992G, D11N, D11R
1799511
SUPPORT GP-PUMP DRIVE
D3G, D4G, D5G
D3G, D4G, D5G