SUPPORT-ENGINE REAR 4P2865 - Caterpillar

Illustration 1 g02555096
Table 1
Specification for 147-3754 Rear Gear Gp
Item Qty Part Specification Description
1 2 9X-7371 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
2 1 4N-1230 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
3 1 6V-1197 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
4 1 8F-8804 Bolt Torque to 136.0 13.6 N m (100.3 10.0 lb ft)
5 1 1D-4569 Bolt Torque to 136.0 13.6 N m (100.3 10.0 lb ft)
6 1 2S-4663 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
7 1 4N-0848 Wear Sleeve Clean the wear sleeve. Also, prime the inner diameter of the wear sleeve and the outer diameter of the crankshaft with 8T-9021 Adhesive. Apply green Loctite 620to the outer diameter of the crankshaft. Install the wear sleeve onto the crankshaft.
8 1 6V-3319 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.