SUPPORT AS-MOTOR 4W6273 - Caterpillar

When it is necessary to work under the machine with the body (bed) raised, attach the body (bed) retaining cable to the rear tow point. Install the rear tow point pin through the end of the retaining cable.Failure to properly secure the body (bed) may result in personal injury or death.
The brake makeup oil tank is located on the inside rail on the left side of the machine near the fuel tank.
Park the machine on a level surface and engage the parking brake.
Raise the dump body to the fully raised position and install the truck body retaining cable to the rear tow point pin. For the proper procedure, refer to Operations and Maintenance Manual, "Cable (Truck Body Retaining)".
Stop the engine.
Illustration 1 g00644470
Remove the cover of brake makeup oil tank (1).
Clean the cover and the brake makeup oil tank in clean nonflammable solvent.
Inspect the cover seal and replace the cover seal if the cover seal is damaged.
Install the cover.
Remove the truck body retaining cable and lower the body.