SUPPORT-DIODE 5029730 - Caterpillar

Selection of a hydraulic crusher must be done with extra care.Use of a hydraulic crusher not recommended by Caterpillar could result in structural damage to the host machine.Consult your Cat dealer for hydraulic crusher information.
Close all windows. Make sure that all required guards are in place. Wear all required protective equipment. Follow the instructions in the Operation and Maintenance Manual for the work tool.
Illustration 4 g06222800Demolition work on the roof of a building could lead to serious personal injury if the building were to collapse and the excavator turned over or fell off the roof. The demolition work must be started ONLY AFTER surveying the building for its structural integrity.
Illustration 5 g06222803Crushing work above your head must be avoided because objects can fall and damage the machine.
Illustration 6 g06222806Do not perform demolition work at the base of the machine, because the ground could be unstable and cause the machine to fall.
Illustration 7 g06222809Do not suddenly lower or stop the work tool, otherwise the excavator could turn over.
Illustration 8 g06222813Crushing work using impact, swing, or dropping forces of the excavator could cause damages to the machine and also could lead to personal injury. As such, NEVER perform such an operation.
Illustration 9 g06222817Crushing work with hydraulic cylinder at stroke end position could damage the excavator, resulting in shortening of lifespan. Also, as it could lead to unexpected personal injury due to breakage of the machine, do not perform any work at stroke end.
Illustration 10 g06222821When performing work at elevated positions, always use care for the surroundings as well as for falling objects to avoid personal injury. Use guide personnel and signs as required.
Illustration 11 g06222829When working sideways, the track can lift. Avoid abrupt operation and operate slowly.
Illustration 12 g06222831Crushers could interfere with the boom and the cab depending on the type and method of usage. Know the working range of the crusher being used.
Illustration 13 g06222833If the tooth of the crusher engages an object at a slant, excessive forces could be applied to the front regions. As such move the crusher to the front.
Illustration 14 g06222836Never extend the boom cylinder suddenly. Sudden extension of the boom could cause tip backwards.
Illustration 15 g06222831Sudden extension of the bucket cylinder, or sudden extension of the stick cylinder could cause damages at the stroke end position, resulting in personal injury. Operations that cause sudden extension of the cylinders is PROHIBITED!