5056945 SUPPORT GP- Caterpillar parts
Rating:
Alternative (cross code) number:
CA5056945
505-6945
5056945
CA5056945
505-6945
5056945
Information:
Required Tools and Installation Procedure
Table 1
Required Tools    
FT-2806     Alignment Tool    
Ensure that all parts and surfaces of the engine block are clean and free from oil, grease, and dirt.
Illustration 1 g00829702
Typical installation of the new rear housing assembly (1) Crankshaft flange (2) Plastic sleeve (3) Rear housing assembly (4) Alignment tool (5) BoltsNote: The crankshaft rear seal is lubricated. There is no need to lubricate the seal or the crankshaft flange before installation.
Place rear housing assembly (3) on crankshaft flange (1) until the rear housing assembly contacts the cylinder block face. Plastic sleeve (2) will push out of the rear housing assembly. Discard the plastic sleeve after the rear housing assembly is installed.
Place alignment tool (4) over rear housing assembly (3). This will center the rear housing assembly onto the crankshaft flange.
Illustration 2 g00830867
Install bolts (5) with alignment tool (4) in position in order to fasten rear housing assembly (3) to the cylinder block. Tighten bolts 1 and 2 to a torque of 22 N m (16 lb ft).
Remove alignment tool (4). Tighten the remaining bolts in sequence to a torque of 22 N m (16 lb ft).
Table 1
Required Tools    
FT-2806     Alignment Tool    
Ensure that all parts and surfaces of the engine block are clean and free from oil, grease, and dirt.
Illustration 1 g00829702
Typical installation of the new rear housing assembly (1) Crankshaft flange (2) Plastic sleeve (3) Rear housing assembly (4) Alignment tool (5) BoltsNote: The crankshaft rear seal is lubricated. There is no need to lubricate the seal or the crankshaft flange before installation.
Place rear housing assembly (3) on crankshaft flange (1) until the rear housing assembly contacts the cylinder block face. Plastic sleeve (2) will push out of the rear housing assembly. Discard the plastic sleeve after the rear housing assembly is installed.
Place alignment tool (4) over rear housing assembly (3). This will center the rear housing assembly onto the crankshaft flange.
Illustration 2 g00830867
Install bolts (5) with alignment tool (4) in position in order to fasten rear housing assembly (3) to the cylinder block. Tighten bolts 1 and 2 to a torque of 22 N m (16 lb ft).
Remove alignment tool (4). Tighten the remaining bolts in sequence to a torque of 22 N m (16 lb ft).
Caterpillar SIS machinery equipment:
Caterpillar SIS
3516E Marine Engine MRY00001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine MRN00001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine MRC00001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine MR900001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine MR800001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine MR700001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine MR400001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SW200001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SW300001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SW400001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SW500001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SW600001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SWD00001-UP »
505-6945
SUPPORT GP-LINES
3516E Marine Engine SWK00001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine SY600001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine SY700001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine SY800001-UP »
505-6945
SUPPORT GP-LINES
3512E Marine Engine SY900001-UP »
505-6945
SUPPORT GP-LINES
Parts support Caterpillar catalog:
5056722
SUPPORT AS
Caterpillar
Caterpillar
5056720
SUPPORT AS
Caterpillar
Caterpillar
5056716
SUPPORT-ENGINE
Caterpillar
Caterpillar
5055276
SUPPORT
Caterpillar
Caterpillar
5051957
SUPPORT AS
Caterpillar
Caterpillar
5051956
SUPPORT AS
Caterpillar
Caterpillar
5060447
SUPPORT AS
Caterpillar
Caterpillar
5058247
SUPPORT AS
Caterpillar
Caterpillar
5058235
SUPPORT
Caterpillar
Caterpillar
5058234
SUPPORT
Caterpillar
Caterpillar
5057120
SUPPORT AS
Caterpillar
Caterpillar
5057117
SUPPORT AS
Caterpillar
Caterpillar