SUPPORT AS-ENG 5062573 - Caterpillar

Remove cam ring (39) .
Illustration 22 g00883099
Remove rotor (40). Remove O-ring seal (41) .
Illustration 23 g00883103
Illustration 24 g00883108
Use Tooling (D) to remove retaining ring (42). Remove washer (43). Repeat Step 22 for the other side.
Illustration 25 g00883145
Illustration 26 g00883168
Note: Return the piston to the original bore.
Remove piston (44) from rotor (40). Remove O-ring seal (45). Remove roller (46) .
Illustration 27 g00883170
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (E) to remove split ring (47) .
Illustration 28 g00883177
Remove washer (48) .
Illustration 29 g00883179
Block front case (49). Use a suitable press to remove spindle (50) .
Illustration 30 g00883218
Block spindle (50). Use a suitable press to remove studs (51) .
Illustration 31 g00883219
Remove seal (52) from spindle (50) .
Illustration 32 g00883224
Use Tooling (F) and Tooling (G) to remove bearing cone (53) .
Illustration 33 g00883226
Remove bearing cone (54) .
Illustration 34 g00883228
Remove seal (56). Remove bearing cup (55) .
Illustration 35 g00883230
Remove seal (58). Remove bearing cup (57). Remove plug (59) .