SUPPORT-EXHAUST 5192317 - Caterpillar

Illustration 1 g00873236
(1) "Choose Driver". (2) "ADJ Boom". (3) "Copy". (4) "Trip counter".Press the menu key on the IQAN display. Press the function key for the "ADJ Boom" function (2). The following screen will be displayed:
Illustration 2 g00890962
(5) "Max current". (6) "Function". (7) "Choose". (8) "Ramp time". (9) "Output". (10) "Fine CONT". (11) "Min current". (12) "Driver 1".The following list of definitions gives you adjustment procedures for each variable that is listed in Illustration 2."Max current" (5) - This is the maximum output to the solenoid. The "Max current" controls the maximum speed of the function. When the joystick reaches the end of travel, the function should move at maximum speed. Do not adjust the value so that you lose control of the function. If the current is set too high, the function will reach maximum speed before the joystick reaches the end of travel. If the current is set too low, the function may not reach a speed that is acceptable to the operator. To allow the operator to reach a log on the first attempt, the "Max current" should be set so that the hydraulics are not too responsive. When the "Max current" is set too high, the hydraulics are very responsive.Note: