SUPPORT-FILTER 5362424 - Caterpillar

Illustration 6 g01944753
6V-8936 Reducer
Illustration 7 g01944755
Hose assembly
Table 4
Required Tools    
Part Number    Description    Qty    
1U-5796     Pressure Differential Gauge Group     1    
6V-9836     Swivel Tee     1    
6V-8397     O-Ring Seal     3    
6V-9837     Swivel Tee     1    
6V-8398     O-Ring Seal     2    
6V-8936     Reducer     1    
153-0785     Permanent Coupling As     1    
153-0787     Permanent Coupling As     1    
238-8343     Hose    
305 mm (12.0 inch)    
Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic systems. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component.Lower all attachments to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the attachment in the raised position, the attachments and lift cylinders must be supported properly.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when