SUPPORT 5445601 - Caterpillar

Illustration 1 g01285698
(1) "Obtain production files from one or more drills" icon
In order to select a production file from one or more drills, select the "Obtain production files from one or more drills" icon (1) from the display screen. Refer to Illustration 1.
Illustration 2 g01285700
(2) "Arrow" Icon (3) "Next" Icon
A screen for selection of the drill(s) will appear. Refer to Illustration 2.The left hand side of the screen displays a list of drills that are available. The right hand side of the screen displays a list of drills "that the production files are retrieved from".
Select the appropriate drill(s) in the left hand list. Move the selected drill(s) into the right hand list with the icons that are between the two lists.
Click on the "Next" icon (3) .
Illustration 3 g01285736
(4) "Back" Icon (5) "Finish" Icon
The "Get production wizard" will display a screen that summarizes the actions that have been selected. Verify that the settings are correct and click the "Finish" icon (5) .If the settings are not correct, then click the "Back" icon (4) in order to modify your options for the configuration. Refer to Illustration 3.
Illustration 4 g01294559
(6) "Close" Icon
Verify the transfer of the production files from the drill(s). Once the transfers are complete, click on the "Close" icon (6). Refer to Illustration 4.