SUPPORT 5I6870 - Caterpillar

Illustration 1 g03700588
Typical example
Table 1
Specification for 383-2463 Upper Frame and 383-2468 Upper Frame
Item Qty Part Specification Description
A - - Clearance between the pin end and the side of the cab must be kept over to 10.0 mm (0.39 inch).
1 As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.39 inch).
2 212-2840 Shim Thickness is 2.00 0.15 mm (0.079 0.006 inch).
2 436-0263 Shim Thickness is 3.00 0.15 mm (0.118 0.006 inch).
2 As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch).
2 133-2427 Shim Thickness is 0.5 mm (0.02 inch).
4 093-0090 Shim Thickness is 1.0 mm (0.04 inch).
3 2 186-5663 Pin As Before assembly, use the 5P-0960 Grease Cartridge in order to coat all the pin bores.
Diameter is 99.850 0.040 mm (3.9311 0.0016 inch).
4 1 341-5025 Pin As Before assembly, use the 5P-0960 Grease Cartridge in order to coat all the pin bores.
Diameter is 109.85 0.04 mm (4.325 0.002 inch).