SUPPORT ASSEM. 6L5187 - Caterpillar

6L5187 SUPPORT ASSEM. Caterpillar parts D379A

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6L5187
6L-5187
6L5187

Weight: 38 pounds 17 kg.

Buy SUPPORT ASSEM. 6L5187 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: 6L5187:

MARINE ENGINE D379A Caterpillar

Number on catalog scheme: None

Caterpillar 6L5187 Parts scheme SUPPORT ASSEM.

For full view, you need register

Information:

Illustration 1 g00419539
Schematic Of The Left Forward Steering Solenoid
This diagnostic code is recorded when the ECM reads the current of the solenoid as being below normal. There is an open circuit.The possible causes of this diagnostic code are listed:
The circuit of the solenoid is open.
The return circuit of the solenoid is open.
The solenoid has failed.
The ECM has failed. This is unlikely. System Response:When this diagnostic code occurs, a warning (Category 3) is shown on the monitor. The diagnostic code will cause the transmission to shift to NEUTRAL. Limited operation at a reduced speed may be permitted ONLY after returning the speed/direction control lever to the PARK position.Note: Ensure that CID 0469 FMI 05 is on hold and that the diagnostic code indicator shows "SERV CODE". The nominal coil resistance at room temperature is 7.75 ohms.Note: The following test procedure may create other diagnostic codes. Ignore these created diagnostic codes and clear these diagnostic codes when the original diagnostic code is corrected.Test Step 1. CHECK THE SOLENOID.
Turn the disconnect switch and the key start switch to the ON position. Do not start the engine.
Disconnect the solenoid with the active diagnostic code from the machine harness.
At the machine harness connector for the solenoid, place a jumper wire from contact 1 (wire 843-WH(White)) to contact 2 (wire 975-WH(White)).
Observe the status of the diagnostic code indicator. "SERV CODE" will be