SUPPORT ASSEM. 6M1190 - Caterpillar

6M1190 SUPPORT ASSEM. Caterpillar parts 824S

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA6M1190
6M-1190
6M1190

Weight: 5330 pounds 2417 kg.

Buy SUPPORT ASSEM. 6M1190 Caterpillar genuine, new aftermarket tractor parts with delivery
BULLDOZER,

Compatible equipment models: 6M1190:

BULLDOZER 824S Caterpillar

Number on catalog scheme: 1

Caterpillar 6M1190 Parts scheme SUPPORT ASSEM.

For full view, you need register

Information:

Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Illustration 9 g00862601 (1) Lubricate the seal lips with the lubricant that is being sealed. (2) Lubricate the threads of the bolt with the lubricant that is being sealed. Torque for the bolt ... 3000 300 N m (2220 220 lb ft) (3) Bore diameter of a new cylinder ... 114.3 0.08 mm (4.50 0.003 inch) (4) Diameter of a new rod ... 63.45 .038 mm (2.5 0.0015 inch) (5) Bore diameter of a new head ... 63.83 .03 mm (2.513 0.0012 inch) (6) Lubricate the threads of the bolt with the lubricant that is being sealed. Torque for the bolt ... 600 130 N m (441 96 lb ft)Use Tooling (F) for the removal of the bearings in the head end and the rod end of the steering cylinder.Installation Procedure
Table 3
Required Tools
Tool Part Number Description Qty
B 138-7575 Link Bracket
C 1U-9200 Lever Puller Hoist 1
Illustration 10 g01079838
Illustration 11 g01079840
Attach a suitable lifting device to steering cylinder (11), as shown. The weight of the steering cylinder is approximately 91 kg (200 lb). Install steering cylinder (11) from the rear of the machine. Install pin (14). Install bolt (12) and washer (13).
Illustration 12 g01079836
Install Tooling (B) to the cab mounting bolt, as shown. Attach Tooling (C) to the rod end of steering cylinder (11).
Illustration 13 g01079826
Illustration 14 g01079827
Connect hose assemblies (8) and (9). Connect hose assembly (10).
Start the machine and slowly extend the steering cylinder.
Illustration 15 g01079822
Install pin (5). Install bolt (7) and washer (6).
Illustration 16 g01080508
Illustration 17 g01079803
Attach a suitable lifting device to the right side of the operator's platform (1). Install the right side operator's platform (1) and install nuts (2). Slide guard (4) toward the front of the machine and install bolts (2). End By:
Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".