SUPPORT A 6Q7480 - Caterpillar

1. Loosen two bolts (2) that hold pins (1). 2. Position a pry bar against the brake disk and pin (1). Pry pins (1) out until brake linings (3) can be removed from brake caliper (4). 3. Remove two brake linings (3) from brake caliper (4). The following steps are for installation of the brake linings. 4. Put brake linings (3) in position, and push pins (1) into brake caliper (4).5. Measure the distance between pins (1) and the brake disc with a feeler gauge, as shown. The distance must be 1.5 0.5 mm (.06 .02 in). Move pins (1) in or out to obtain the correct clearance. Tighten bolts (2) to a torque of 47.6 4.1 N m (35 3 lb ft).