SUPPORT AS-SHAFT 7C0325 - Caterpillar

Failure to comply to the rated load can cause possible personal injury or attachment damage. Review the rated load of a particular attachment before performing any operation. Make adjustments to the rated load as necessary.
Note: Rated loads should be used as a guide. Different work tools and poor ground conditions have effects on rated loads. The operator is responsible for being aware of these effects.Rated loads are based upon a standard machine with the following conditions:
Proper lubricants
Full fuel tank
Enclosed ROPS
80 kg (176 lb) operator
35/65-33 or equivalent tiresConsult your Caterpillar dealer about the rated load for a specific work tool.The rated operating load is defined by the SAE standard "J818" (May 1987) and by the ISO 5998 (1986) as 50 percent of the full turn static tipping load.The dump clearance and the reach are given for each bucket at maximum lift height and at a 45 degree dump angle. Clearance is measured from the ground to the bucket edge when the bucket is in the full DUMP position. The reach is measured from the front tire to the bucket edge.
Illustration 1 g00835725
Dimension (A) represents the dump clearance. Dimension (B) represents the reach.
The following table provides the rated operating loads for the standard machine configuration.
Table 1
Rated Load
988K Standard Machine Configuration
Ground Engaging Tools Rated Volume Rated Operating Load Dump Clearance
A Reach
B
Spade Rock with Teeth and Segments (Standard Bucket) 6.4 m3 (8.33 yd3) 11340 kg (25000 lb) 3861 mm (152 inch) 1724 mm (68 inch)
Wide Spade Rock with Teeth and Segments 6.9 m3 (9 yd3) 11340 kg (25000 lb) 3807 mm (150 inch) 1778 mm (70 inch)
General Purpose with Bolt-On Cutting Edges 6 m3 (7.8 yd3) 11340 kg (25000 lb) 3890 mm (153 inch) 1641 mm (65 inch)
Rock Quarry (Heavy Duty) with Teeth and Segments 6.4 m3 (8.33 yd3) 11340 kg (25000 lb) 3848 mm (151 inch) 1594 mm (63 inch)
Spade Rock with Teeth and Segments 7.6 m3 (9.9 yd3) 11340 kg (25000 lb) 3729 mm (147 inch) 2126 mm (84 inch) The following table provides the rated operating loads for the highlift machine configuration.
Table 2
Rated Load
988K Highlift Machine Configuration
Ground Engaging Tools Rated Volume Rated Operating Load Dump Clearance
A Reach
B
Spade Rock with Teeth and Segments (Standard Bucket) 6.4 m3 (8.33 yd3) 11340 kg (25000 lb) 4266 mm (168 inch) 1845 mm (73 inch)
Wide Spade Rock with Teeth and Segments 6.9 m3 (9 yd3) 11340 kg (25000 lb) 4211 mm (166 inch) 1866 mm (73 inch)
General Purpose with Bolt-On Cutting Edges 6.9 m3 (9 yd3) 11340 kg (25000 lb) 4294 mm (169 inch) 1728 mm (68 inch)
Rock Quarry (Heavy Duty) with Teeth and Segments 6.4 m3 (8.33 yd3) 11340 kg (25000 lb) 4252 mm (167 inch) 1825 mm (72 inch)
Spade Rock with Teeth and Segments 7.6 m3 (10 yd3) 11340 kg (25000 lb) 4133 mm