SUPPORT-FUEL FILTER 7C4456 - Caterpillar

Illustration 1 g02529490
Typical example
Front view of engine
Table 1
Specification for 241-3006 Turbocharger Gp 242-3492 Turbocharger Gp
Item Qty Part Specification Description
1 4 2N-2766 Locknut Torque to 55 5 N m (41 4 lb ft).
2 1 7W-2297 Clamp As Use the following procedure to tighten the clamps for the turbocharger. Orient the turbocharger turbine housing and the bearing housing in order to avoid binding:
1. Loosen the clamp assemblies in order to rotate the housings.
2. Position the housings with oil lines so that oil lines are aligned without binding.
3. Tighten the clamp assemblies to 14 1 N m (124 9 lb in).
4. Lightly tap around the clamp assemblies with a soft faced hammer.
5. Again, tighten the clamp assemblies to 14 1 N m (124 9 lb in).
3 1 9N-2038 Turbine Clamp As
4 4 2N-2765 High Temperature Bolts Before assembly, apply 4C-5599 Anti-Seize Compound to the threads.
- - - Opening pressure of the wastegate at 1.0 mm (0.04 inch) lift is 182.0 3.0 kPa (26.4 0.5 psi).