SUPPORT AS-SHAFT 7C7199 - Caterpillar

Removal Procedure
Start By:
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the rocker shaft and pushrods. Refer to Disassembly and Assembly, "Rocker Shaft And Pushrod - Remove".
Remove the unit injectors. Refer to Disassembly and Assembly, "Unit Injector - Remove".
Remove the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01153598
Disconnect harness assemblies (1), (2), (3), (4), and (5) .
Illustration 2 g01153599
Disconnect hose assembly (6) and tube assembly (7) .
Illustration 3 g01153600
Disconnect tube assembly (8) and tube assembly (10) from turbocharger (9) .
Illustration 4 g01153645
Attach a suitable lifting device to cylinder head (11). The weight of cylinder head (11) is approximately 175 kg (385 lb).
Remove bolts (12) and bolts (13). Remove cylinder head (11) and the gasket from the cylinder block.