SUPPORT AS 7N7495 - Caterpillar

The screen will ask “Are you sure you want to abort?”. Press the OK button (5) to continue aborting the procedure. Press the BACK button (7) to return to the previous Calibration procedure screen.
Illustration 34 g06203044
(5) OK button
The Calibration Unsuccessful screen will appear. Press the OK button (5) to exit the Calibration.Calibration Weight
Illustration 35 g06203045
Payload menu page
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(23) Calibration Weight menu buttonReference the “Cat® Production Measurement (CPM) Systems Operations Manual (M0079530)” for more details on calibrating the Payload system.
Press the Calibration Weight menu button (23). The button will turn to blue, then turn to yellow. The Calibration Weight settings page will appear.
Illustration 36 g06206235
(7) BACK button
(8) HOME button
(24) ENTER DATA button
Press the ENTER DATA button (24). The Calibration Weight keyboard appears.
Illustration 37 g06206240
(5) OK button
(7) BACK button
(8) HOME button
(25) Keypad BACK button
(26) Estimated Cal Weight readout screen
The system provides an Estimated Calibration Weight (26) that is calculated based on the results of the “Empty Bucket Weight” and “Full Bucket Weight” procedures. This allows the system to be calibrated if site scales are not available to confirm the actual weight of material used for the “Full Bucket Weight” calibration.
Enter the desired Calibration Weight number with the keypad. This can be the same as the Estimated Calibration Weight (26), or a known weight calculated from site scales. Press the OK button (5) to set the entry.
Correct a mistyped number by pressing the Keypad BACK button (25), then reenter the correct number.
Press the BACK button (7) to return to the previous page.
Press the HOME button (8) to return to the Home page (Performance Page 1).ECM Summary
Service > ECM Summary
Illustration 38 g06206244
Service menu page
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(27) ECM Summary menu button
Press the ECM Summary menu button (27). The menu button will first turn to blue, then to yellow. The ECM Summary menu page will appear.
Illustration 39 g06206246
ECM Summary menu page
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(28) ECM Summary menu button group
Illustration 40 g06206247
ECM Summary menu page
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(28) ECM Summary menu button groupECM Summary Information is available for the following:
Engine
Machine
4th Function
Primary Display
Secondary Display
Product Link
Press the UP Arrow button (4) or the DOWN Arrow button (6) to scroll through the ECM Summary menu buttons. The Menu Sliding Indicator of the Non-Interactive Scroll Bar (3) will move along with the page.Example: ECM Summary > Engine
Illustration 41 g06206251
ECM Summary menu page
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) UP Arrow button
(5) OK button
(6) DOWN Arrow button
(7) BACK button
(8) HOME button
(29) Engine menu button
Illustration 42 g06206256
Engine data page
(7) BACK button
(8) HOME buttonNote: The above illustration shows an example screen for the ECM Summary – Engine data page. The screen on the right shows a view of an ECM Summary screen. The ECM Summary will vary depending on the machine model and equipped features.Accessing the other