SUPPORT 7T0341 - Caterpillar

Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00591547
Install the O-ring seals on the housing. Install cover (23) and bolts (22).
Install O-ring seal (25).
Install pin (24), if necessary. The pin must be 6.50 1.00 mm (0.256 0.040 inch) above the surface of the housing.
Illustration 2 g00591546
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install bypass valve (18) and spring (19).
Install O-ring seals (20) and (21).
Illustration 3 g00591545
Install covers (15) and (17). Install bolts (14) and (16).
Illustration 4 g00591544
Install support (13), the bolts, and nuts (12). Tighten the nuts to a torque of 55 7 N m (41 5 lb ft).