SUPPORT-THR- 7T1998 - Caterpillar

Illustration 1 g03399396
Table 1
Specification for 123-8937 Hoe Stick Gp    
Item     Qty     Part     Specification Description    
All bores must be free of paint. Use 5P-0960 Grease Cartridge in order to coat all bores for the pins, the bushings , the bucket, and the cylinder pin bores.    
1     1     169-1360 Pin As     Diameter is
49.850 0.025 mm (1.9626 0.0010 inch).    
2     2     9R-7273 Spacer     As required, use the spacers in order to adjust the lateral clearance to a maximum of
1.0 mm (0.04 inch):
Thickness of one spacer is
1.0 mm (0.04 inch).    
3     1     163-7168 Shim     As required, use the shim of thickness
0.5 mm (0.02 inch) to adjust maximum lateral clearance of
1.0 mm (0.04 inch).    
4     1     093-0065 Shim     As required, use the shim of thickness
1.0 mm (0.04 inch) to adjust maximum lateral clearance of
1.0 mm (0.04 inch).    
5     As required, use the following shims to adjust a maximum lateral clearance of
1.0 mm (0.04 inch):    
1 133-2717 Shim     Thickness is
0.5 mm (0.02 inch).    
1 093-0097 Shim     Thickness is
2.0 mm (0.08 inch).    
6     1     172-5863 Pin As     Diameter is
59.850 0.025 mm (2.3563 0.0010 inch).    
7     4     093-1434 Lip Type Seal     Before assembly, lightly lubricate the sealing lip with black 5P-0960 Grease Cartridge .    
8     4     113-4982 Bushing     Bore before assembly is
70.230 0.020 mm (2.7650 0.0008 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
9     2     114-4866 Bushing     Bore before assembly is
50.18 0.02 mm (1.976 0.001 inch).    
Installation depth is
7.5 0.5 mm (0.30 0.02 inch).
10     2     7X-2552 Bolt     Torque to
300 40 N m (221 30 lb ft).    
11     2     114-4850 Lip Type Seal     Before assembly, lightly lubricate the sealing lip with black 5P-0960 Grease Cartridge .