7W6540 SUPPORT AS-FRONT Caterpillar parts
3304, 3304B, 3306, 3306B
Rating:
Alternative (cross code) number:
CA7W6540
7W-6540
7W6540
CA7W6540
7W-6540
7W6540
Weight: 32 pounds 14 kg.
ENGINE - MACHINE, MARINE ENGINE,
Compatible equipment models: 7W6540:
Number on catalog scheme:
5
For full view, you need register
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If any of the parts on the engine oil pump are worn or damaged, the entire pump must be replaced.
Illustration 1 g00956778
Install engine oil pump (9). Install bolts (8). Tighten bolts (8) to a torque of 9 N m (80 lb in).
Fill engine oil pump (9) with clean engine oil.
Position engine oil pump assembly (2) against the cylinder block. Ensure that dowel pin (10) and hollow dowel (11) are correctly located in the cylinder block.
Install bolts (1). Tighten bolts (1) to a torque of 44 N m (32 lb ft).
Illustration 2 g00956781
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Clean spring (6) and plunger (7) of the engine oil relief valve. Lubricate spring (6) and plunger (7) with clean engine oil.
Install plunger (7), spring (6), and plug (5) in engine oil pump assembly (2). Tighten plug (5) to a torque of 22 N m (16 lb ft).
Position suction pipe (4) and install bolts (3). End By:
Install the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If any of the parts on the engine oil pump are worn or damaged, the entire pump must be replaced.
Illustration 1 g00956778
Install engine oil pump (9). Install bolts (8). Tighten bolts (8) to a torque of 9 N m (80 lb in).
Fill engine oil pump (9) with clean engine oil.
Position engine oil pump assembly (2) against the cylinder block. Ensure that dowel pin (10) and hollow dowel (11) are correctly located in the cylinder block.
Install bolts (1). Tighten bolts (1) to a torque of 44 N m (32 lb ft).
Illustration 2 g00956781
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Clean spring (6) and plunger (7) of the engine oil relief valve. Lubricate spring (6) and plunger (7) with clean engine oil.
Install plunger (7), spring (6), and plug (5) in engine oil pump assembly (2). Tighten plug (5) to a torque of 22 N m (16 lb ft).
Position suction pipe (4) and install bolts (3). End By:
Install the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts support Caterpillar catalog:
3304, 3306, 3306B, D250B
120G, 130G, 3304, 3304B, 515, 517, 518C, 525, 527, 936, 936F, 950B, 963, CB-534, D4E SR, D4H, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, E240, G936
7L0500
SUPPORT ASSEM.
3304, 3306, G3306
3304, 3306, G3306
7L0499
SUPPORT ASSEM.
3304, 3306, G3306
3304, 3306, G3306
6L7301
SUPPORT ASSEM.
3306, G3306
3306, G3306
6L7302
SUPPORT ASSEM.
3306, G3306
3306, G3306
4L4216
SUPPORT ASSEM.
3304, 3306
3304, 3306
4N6312
SUPPORT
3304
3304
3L9713
SUPPORT ASSEM.
3306, D320A
3306, D320A
6L1859
SUPPORT
3306
3306
7N1267
SUPPORT AS-REAR
3304, 3304B, 3306, 3306B, G3304
3304, 3304B, 3306, 3306B, G3304
7N6059
SUPPORT AS
3304, 3304B, 3306, 3306B, 3306C, D250B, D25C, D300B, D30C, D350C, D35C
3304, 3304B, 3306, 3306B, 3306C, D250B, D25C, D300B, D30C, D350C, D35C
1N5526
SUPPORT AS
3304, 3304B, 3306, G3304, G3304B, G3306, G3306B
3304, 3304B, 3306, G3304, G3304B, G3306, G3306B
3304, 3304B, 3306, 3306B, CB-534, G3304, G3304B, G3306, G3306B
1W6333
SUPPORT AS-REAR-RH
3304, 3306
3304, 3306
1W6334
SUPPORT AS-REAR-LH
3304, 3306
3304, 3306
12G, 12H, 12H ES, 12H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 235B, 235C, 235D, 330, 330 FM L, 3306, 3306B, 3306C, 330B L, 350, 528B, 530B, 545...
7L5810
SUPPORT AS
3126, 3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31...
3126, 3126B, 3176B, 3176C, 3196, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3456, C-10, C-12, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31...
5N1677
SUPPORT AS
3126, 3126B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3412, 3456, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9I, CX35-P800, G3306, G3406, TH31-E61, TH35-C11I, TH35-C13I,...
3126, 3126B, 3306, 3306B, 3406, 3406B, 3406C, 3406E, 3408, 3412, 3456, C-15, C-16, C-9, C11, C13, C15, C18, C9, CX31-C13I, CX31-C15I, CX31-C9I, CX35-P800, G3306, G3406, TH31-E61, TH35-C11I, TH35-C13I,...
1167595
SUPPORT AS-ENGINE
3306, 3306B, D250E, D250E II, D25D, D300E, D300E II
3306, 3306B, D250E, D250E II, D25D, D300E, D300E II
1106267
SUPPORT AS-REAR
3304, 3306, 3306B
3304, 3306, 3306B
3306, 3306B