7Y5122 SUPPORT AS Caterpillar parts
320 L, 322 LN, 325, 325 L, 325 LN, 330, 330 FM L, 330 L, 350 L, 375, 5080
Rating:
Alternative (cross code) number:
CA7Y5122
7Y-5122
7Y5122
CA7Y5122
7Y-5122
7Y5122
Weight: 2 pounds 1 kg.
EXCAVATOR, FRONT SHOVEL,
Compatible equipment models: 7Y5122:
Number on catalog scheme:
33
For full view, you need register
Information:
Flash Programming - A method of loading a flash file into the Electronic Control Module (ECM)The electronic service tool can be utilized to program a flash file into the ECM. The flash programming transfers the flash file from the PC to the ECM.Flash Programming a Flash File
Obtain the part number for the new flash file. Note: If the part number for the flash file is not available, use the "Flash File Search" tool on the Service Technician Workbench (STW). Alternatively, use the "Flash Software Files" feature on SIS Web.Note: The engine serial number is required in order to search for the part number of the flash file.
Connect the electronic service tool to the diagnostic connector.
Turn the keyswitch to the ON position. Do not start the engine.
Select "WinFlash" from the "Utilities" menu on the electronic service tool. Note: If "WinFlash" will not communicate with the ECM, refer to Troubleshooting, "Electronic Service Tool Will Not Communicate with ECM".
Flash program the flash file into the ECM.
Select the engine ECM under the "Detected ECMs".
Press the "Browse" button in order to select the part number of the flash file that will be programmed into the ECM.
When the correct flash file is selected, press the "Open" button.
Verify that the "File Values" match the application. If the "File Values" do not match the application, search for the correct flash file.
When the correct flash file is selected, press the "Begin Flash" button.
The electronic service tool will indicate when flash programming has been successfully completed.
Start the engine and check for proper operation.
Access the "Configuration" screen under the "Service" menu in order to determine the parameters that require programming. Look under the "Tattletale" column. All of the parameters should have a tattletale of 1 or more. If a parameter has a tattletale of 0, program that parameter. "WinFlash" Error Messages
If any error messages are received during flash programming, click on the "Cancel" button in order to stop the process. Access the information about the "ECM Summary" under the "Information" menu. Ensure that the correct flash file has been selected for the engine.
Obtain the part number for the new flash file. Note: If the part number for the flash file is not available, use the "Flash File Search" tool on the Service Technician Workbench (STW). Alternatively, use the "Flash Software Files" feature on SIS Web.Note: The engine serial number is required in order to search for the part number of the flash file.
Connect the electronic service tool to the diagnostic connector.
Turn the keyswitch to the ON position. Do not start the engine.
Select "WinFlash" from the "Utilities" menu on the electronic service tool. Note: If "WinFlash" will not communicate with the ECM, refer to Troubleshooting, "Electronic Service Tool Will Not Communicate with ECM".
Flash program the flash file into the ECM.
Select the engine ECM under the "Detected ECMs".
Press the "Browse" button in order to select the part number of the flash file that will be programmed into the ECM.
When the correct flash file is selected, press the "Open" button.
Verify that the "File Values" match the application. If the "File Values" do not match the application, search for the correct flash file.
When the correct flash file is selected, press the "Begin Flash" button.
The electronic service tool will indicate when flash programming has been successfully completed.
Start the engine and check for proper operation.
Access the "Configuration" screen under the "Service" menu in order to determine the parameters that require programming. Look under the "Tattletale" column. All of the parameters should have a tattletale of 1 or more. If a parameter has a tattletale of 0, program that parameter. "WinFlash" Error Messages
If any error messages are received during flash programming, click on the "Cancel" button in order to stop the process. Access the information about the "ECM Summary" under the "Information" menu. Ensure that the correct flash file has been selected for the engine.
Caterpillar parts catalog:
Parts support Caterpillar catalog:
1031309
SUPPORT AS
375, 375 L, 5080
375, 375 L, 5080
1031308
SUPPORT AS
375, 375 L, 5080
375, 375 L, 5080
1031310
SUPPORT AS
375, 375 L, 5080
375, 375 L, 5080
1223456
SUPPORT AS
350, 350 L, 375, 5080
350, 350 L, 375, 5080
1151694
SUPPORT AS
375, 5080
375, 5080
1390, 320B, 320C, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325B L, 325C, 325C FM, 330B L, 345B II, 345B L, 5080, 521B, 522B, 541, 551, 552, TK741, TK751, TK752
1968795
SUPPORT AS
5080
5080
1968802
SUPPORT AS
5080
5080
1795731
SUPPORT AS
345B II, 345B L, 5080
345B II, 345B L, 5080
1978172
SUPPORT AS
5080
5080
1978173
SUPPORT AS
5080
5080
7Y4642
SUPPORT AS
320 L, 320C, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325C, 330, 330 FM L, 330 L, 330C, 350 L, 375, 5080
320 L, 320C, 322 FM L, 322 LN, 325, 325 L, 325 LN, 325C, 330, 330 FM L, 330 L, 330C, 350 L, 375, 5080