SUPPORT AS 8E6513 - Caterpillar

Illustration 1 g01402490
Caterpillar announces the 277-2362 Transmission Analyzer III Group. This tool serves as an interface between a transmission test bench and a personal computer. The 277-2362 Transmission Analyzer III Group performs tests on the following transmissions:
Power Shift planetary and Power Shift countershaft transmissions
Individual clutch Modulation (ICM) transmissions
Challenger transmissions
H and M Series Motor Grader transmissions
Electronic Clutch Pressure Control (ECPC) transmissionsThe transmission analyzer III group performs the following tests:
tests the proportional valves that are used to control the transmissions
performs automatic or manual testing for shorted or open coils on all solenoids
shifts the transmissions
determines if the shift levers, for transmissions which are not controlled by autoshift electronic controls, are functioning correctlyThe transmission analyzer III group uses PC based software for accurate control during testing. Easy to use software provides a step by step sequence for testing. The software also allows control with a mouse or by the keyboard.The approach allows software downloads into the tool in order to add diagnostics for future transmission products. The transmission analyzer III group uses a USB cable for easy connection to the PC.
Table 1
Specifications for the 277-2362 Transmission Analyzer III Group    
Item     Description    
Size     3 X 32 X 15 cm (1.2 X 12.6 X 5.9 inch)    
Weight     Group
6.2 kg (13.8 lb) Tester
4.04 kg (8.9 lb)    
Current Requirement     10 Amperes, Minimum    
AC Power     110 or 240 Volts    
Operating Temperature Range    
−18 to 60 °C (−0 °F to 140 °F)    
Storage Temperature Range    
−40 to 60 °C (−40 to 140 °F)    
Table 2
Consist of the 277-2362 Transmission Analyzer III Group    
Part No.     Description    
277-2363     Transmission Analyzer III Group    
131-5047     Power Cable (AC)    
286-0755     USB Cable (Transmission Analyzer III Group)    
NETG5048     Operating Software    
NEHS0996     Tool Operating Manual    
Table 3
Optional Cables Required for Testing Specific Transmissions    
Part No.     Description     Application    
1U-9479     Adapter Cable     Required for Gear Shift lever Test    
1U-9480     Adapter Cable     Required for Gear Shift Lever Test    
1U-9482     Test Cable     ICM    
1U-9483     Test Cable     Challenger    
9U-7495     Test Cable     Wheel Loader Bulkhead    
9U-7496     Test Cable     12 pin to 2 pin Deutsch Connector    
9U-7497     Test Cable     12 pin to 2 pin SureSeal Connector    
9U-7498     Extension Cable     Deutsch to Deutsch Extension    
256-7623     Test Cable     Tractor Bulkhead - 17 pin    
300-4993     Adapter Cable     17 pin to 14 pin, Some R and T Series Track-type Tractors    
307-3542     Adapter Cable     17 pin to 14 pin D11R (7PZ, 9TR, 9XR, AAF) Track-type Tractors    
Table 4
Minimum PC Requirements    
Component     Requirement    
Processor     Intel Pentium II, 133 MHz    
RAM     128 MB    
Hard Drive     4.3 GB    
CD/DVD     CD drive or Third Generation