8N1653 SUPPORT Caterpillar parts
12G, 140G, 235, 330 L, 3306, 3306B, 330B, 350, 572G, 615, 627B, 966D, 966F, 966G, 970F, 973, D5B, D6D, D6H, D6R, D7G, D7H, D7R, E300B
Rating:
Alternative (cross code) number:
CA8N1653
8N-1653
8N1653
CA8N1653
8N-1653
8N1653
Weight: 8 pounds 3 kg.
EXCAVATOR, WHEEL TRACTOR,
Compatible equipment models: 8N1653:
Number on catalog scheme:
16
For full view, you need register
Information:
Assembly Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean all parts. Replace all parts that are damaged.
Illustration 1 g00556060
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Apply clean engine oil to all parts of the valve before assembly.
Install piston (6) in body (5). Install the piston with the shorter end of the piston toward the inside of the body. The piston must move freely inside the body.
Install spring (7) and piston (2) in piston (6). Piston (2) must move freely in piston (6).
Install piston (8) and spring (9) in body (5).
Install O-ring seal (1) in body (5). Note: Ensure that spring (9) fits into the counterbore in cover (3) when the cover is installed.
Place cover (3) in position on body (5). Install bolts (4). End By:
Install the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Clean all parts. Replace all parts that are damaged.
Illustration 1 g00556060
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Apply clean engine oil to all parts of the valve before assembly.
Install piston (6) in body (5). Install the piston with the shorter end of the piston toward the inside of the body. The piston must move freely inside the body.
Install spring (7) and piston (2) in piston (6). Piston (2) must move freely in piston (6).
Install piston (8) and spring (9) in body (5).
Install O-ring seal (1) in body (5). Note: Ensure that spring (9) fits into the counterbore in cover (3) when the cover is installed.
Place cover (3) in position on body (5). Install bolts (4). End By:
Install the priority valve. Refer to Disassembly and Assembly, "Priority Valve - Install".
Caterpillar parts catalog:
Parts support Caterpillar catalog:
814F, 814F II, 815F, 815F II, 816B, 816F, 816F II, 950F, 950F II, 960F, 966F, 966F II, 970F, R1300
966F, 966F II, 970F
966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K
966G, 966G II, 966H, 966K, 972G, 972G II, 972H, 972K
814, 815, 815B, 816, 816B, 950, 950B, 950B/950E, 950F, 966C, 966D, 966F, 966R
815B, 816B, 966D
950B, 950B/950E, 950F, 966D
814B, 815B, 966D
D7G, D7G2
D7G
330, 330 FM L, 330 L, 330B, 330B L, OEMS
330, 330 FM L, 330 L, 330B, 330B L, OEMS
8N8835
SUPPORT AS-PIPE
3304, 3306
3304, 3306
3304, 3306
4223197
SUPPORT AS
272D, 272D XHP, 299D, 299D XHP
272D, 272D XHP, 299D, 299D XHP
4152135
SUPPORT GP-LINES
450F, C4.4, D3K2 LGP, D4K2 XL, D5K2 XL
450F, C4.4, D3K2 LGP, D4K2 XL, D5K2 XL
9W8536
SUPPORT AS
65, 75
65, 75
416, 426, 428
7W5737
SUPPORT AS
416, 428
416, 428
426, 428
9R1234
SUPPORT AS
426, 428
426, 428