SUPPORT 8N3237 - Caterpillar

Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" M0066576.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Drain the oil from the final drive into a suitable container for storage or disposal.
Illustration 1 g06341721
Illustration 2 g06341723
Illustration 3 g06341724
Illustration 4 g06341726
Illustration 5 g06341733Installation Procedure
Install the travel motor in the reverse order of removal.
Fill the final drive. Refer to Operations and Maintenance Manual Final Drive Oil - Change for the correct filling procedure.