SUPPORT AS-AIR CLEANER 8N3373 - Caterpillar

Intended Use
This machine is classified as a Wheel Loader as described in "ISO 6165:2001". This machine normally has a front mounted bucket. The principal intended functions are digging, loading, lifting, carrying, and moving material such as earth, crushed rock, or gravel. Additional work tools allow this machine to perform other specific tasks.Specified Useful Life or Expected Life
The specified useful life, defined as total years of operation, or expected life, defined as total machine hours, of this machine is dependent upon many factors including the machine owner’s desire to rebuild the machine back to factory specifications. Consult your Cat dealer for assistance in calculating overall owning and operating costs required to determine the machine’s specified useful life or expected life. The following items are required to obtain an economical specified useful life or expected life of this machine:
Perform regular preventive maintenance procedures as described in the Operation and Maintenance Manual.
Perform machine inspections as described in the Operation and Maintenance Manual and correct any problems discovered.
Perform system testing as described in the Operation and Maintenance Manual and correct any problems discovered.
Ensure that machine application conditions comply with Caterpillar’s recommendations.
Ensure that the operating weight does not exceed limits set by manufacturer.
Ensure that all frame cracks are identified, inspected, and repaired to prevent further development.Application/Configuration Restrictions
Refer to "Specifications" below for information about maximum machine weight.Lift arm height restrictions will be found in the Operation and Maintenance Manual for the appropriate work tool.With full fluids, the maximum fore and aft continuous slope operation for proper lubrication is 30 degrees.This machine is approved for use in environments with no explosive gases.Specifications
This machine is equipped with a C7.1 Engine. Dimensions may vary with work tools.Basic machine specifications include the following:
Maxam L3 MS302 23.5R25 tires or equivalent
Full fluids
80 kg (176 lb) operator
2 Valve Hydraulics with Ride Control
Roading Fenders
Secondary Steering Pump
3.1 cubic meter (4.1 cubic yard) general-purpose bucket with BOCEShipping weight includes the following:
Maxam L3 MS302 23.5R25 tires or equivalent
10% fuel in the tank
Full diesel exhaust fluid (DEF) tank
2 Valve Hydraulics with Ride Control
Roading Fenders
Secondary Steering Pump
3.1 cubic meter (4.1 cubic yard) general-purpose bucket with BOCEBasic machine specifications are listed in the following tables.
Table 1
950 GC Wheel Loader
Operating Weight 18850 kg (41558 lb)
Shipping Weight 18553 kg (40903 lb)
Maximum Length 8245 mm (324.6 inch)
Width 2927 mm (115.3 inch)
Height to Top of ROPS 3458 mm (136.1 inch)