SUPPORT AS 8P3901 - Caterpillar

8P3901 SUPPORT AS Caterpillar parts D5B, D5E

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8P3901
8P-3901
8P3901

Weight: 146 pounds 66 kg.

Buy SUPPORT AS 8P3901 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 8P3901:

TRACK-TYPE TRACTOR D5B D5E Caterpillar

Number on catalog scheme: 6

Caterpillar 8P3901 Parts scheme SUPPORT AS

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-0332 Crowfoot Wrench 1
Contact with high pressure fuel may cause personal injury or death. Wait 60 seconds after the engine has stopped to allow fuel pressure to purge before any service or repair is performed on the engine fuel lines.
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Illustration 1 g02144263
Disconnect harness assembly (1).
Fuel pressure sensor (2) must only be used once. Discard fuel pressure sensor (2) after use.
Use Tooling (A) in order to remove fuel pressure sensor (2). Discard fuel pressure sensor (2). Installation Procedure
Install new fuel pressure sensor (2) in reverse order of removal.
Use Tooling (A) in order to tighten the new fuel pressure sensor (2) to a torque of 25 2 N m (18 1 lb ft). Use Tooling (A) in order to tighten the fuel pressure sensor to a final torque of 45 5 N m (33 4 lb ft).