SUPPORT ASSEM. 8S2805 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     LOCTITE
592 Thread Sealant     -    
B     --     LOCTITE
540 Plug Sealant     -    
Illustration 1 g03398579
Disconnect the harness assembly from temperature sensor (5). Remove temperature sensor (5) .
Remove brackets (3). Loosen clamps (1) and (6) .
Remove bolts (2) and remove air inlet elbow (4) .
Illustration 2 g03398589
Remove bolts (8) and tube (7) .
Illustration 3 g03398590
Remove dowel (9) and O-ring seal (10). Remove tube (11) .
Illustration 4 g03398591
Remove cup plug (12) and pipe plug (13) .Installation Procedure
Install air inlet elbow (4) in the reverse order of removal.
Apply Tooling (A) to the threads of pipe plug (13) .
Apply Tooling (B) to cup plug (13) .
Tighten clamp (6) to a torque of 8.5 1 N m (75 9 lb in).
Tighten temperature sensor (5) to a torque of 20 5 N m (177 44 lb in).