SUPPORT AS 8W0414 - Caterpillar

Correct sequence to tighten the four bolts in the retainer.4. While turning the wheel, tighten each bolt to 25 lb ft (35 N m) torque. Use the sequence shown, and tighten each bolt one time only. Then, while turning the wheel, tighten each bolt to 50 lb ft (70 N m) torque. Again, use the sequence shown, and tighten each bolt one time only. When the final drives are to be filled with lubricant, be sure to turn the wheel until the fill plug is in alignment with the horizontal centerline of the axle. This is the latest recommendation for correct oil level. Use the correct lubricant to fill the compartment.