SUPPORT 9G3384 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     124-2946     Lifting Bracket     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Valve rocker arms and unit injector rocker arms can move on the shaft after the bolts have been removed. The shaft should be kept level when removed from the cylinder head. To avoid possible personal injury, keep fingers clear of the valve rocker arms and the unit injector rocker arms when lifting the assembly from the cylinder head.
Illustration 1 g01074087
Illustration 2 g00517462
Illustration 3 g01074086
Install shaft (2), valve rocker arms (1), and unit injector rocker arms (3) as a unit with Tooling (A) .Note: Install shaft (2) with the flat side facing upward.
Repeat Step 1 for the remainder of the rocker arm assemblies.End By:
Install the compression brake. Refer to Disassembly and Assembly, "Compression Brake - Install".
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".