SUPPORT ASSEM. 9K0795 - Caterpillar

Image1.7.1
25. Remove the G971-G2 RD-16 wire from position 1 of the 2-pin, 3E-3361 DT (G-C1) connector that connects to the Shutoff GP ? Air (282-4361). Add a new black wire labeled "SOGL-ASLR" into position 1 of connector G-C1. Route to the new box assembly and enter through the grommet. Connect to 223-6470 Relay Assembly ASLR terminal 12 (N.C.).
26. Replace the cover and 4 screws on the 282-4361 Air Shutoff Group.
27. Steps 15 thru 25 need to be repeated for the Right Side 282-4361 Air Shutoff Group using the 2nd 223-6470 Relay Assembly ASRR contained within the added box assembly.
28. Connect a new 5P-5623 Black Wire labeled "BATT +" between Splice S1 and S2. Splice S1 is located on the circuit 119-E11 RD-16 that connects the 148-0757 ASR Relay and 6T-3642 ASOS Breaker together.
Image1.8.1
29. Connect a new 5P-5623 Black Wire labeled "BATT +" from the splice S2 to the Position 1 of the ASRS 6-pin, 155-2274 DT connector located in the 147-4552 Box Assembly.
30. Connect a new 5P-5623 Black Wire labeled "BATT-" to splice S3. Splice S3 is located on the circuit 200-E8 BK-16 of position 8 on the 8-pin, 3E-3385 DT connector E-C1. Complete the rest of the BATT- circuit by routing circuits shown at splices S4 and S5. These wires will be labeled "BATT-". Include relay assembly terminals 31 and A2 of the 223-6470 ASLR Relay and the 223-6470 ASRR Relay. Also, include position 6 of the ASRS 6-pin, 155-2274 DT Connector located in the 147-4552 Box Assembly.
31. Remove and insulate the red wire from position 7 of the 8-pin, 155-2264 DT Connector A-C38 that connects to the 282-4358 ASOS Harness. Replace this with new black wire (5P-5623) labeled "ASR" that connects to terminals 11 and 21 of both 223-6470 ASLR and 223-6470 ASRR Relay Assemblies. Label these wires "ASO SIGNAL". See splices labeled S8 and S9 in the schematic below.
Image1.9.1
32. Complete the ASLR and ASRR N.O. control circuits by connecting new 5P-5623 Black Wires between position 24 of the 252-1732 ASLR and the 252-1732 ASRR Relay Assemblies (see splice S7) and position 2 of the ASRS 6-pin, 155-2274 DT Connector located in the 147-4552 Box Assembly.
33. Connect a new 5P-5623 Black Wire to terminal 34 of both relay assemblies and splice them together (S6). Connect a 5P-5623 Black Jumper Wire between splice S6 and position 5 of the ASRS 6-pin, 155-2274 DT connector located in the 147-4552 Box Assembly. Run a 5P-5623 Black Wire labeled "DIGITAL AIR SHUTOFF" from this splice (S6) to the doghouse enclosure 40-pin, 9X-1343 Connector. Populate an empty pin/socket of the 40-pin 9X-1343 Connector and continue it to route a black wire to the AC/DC panel. This will connect to EMCP digital input number 6 within the AC/DC panel and label this wire "DIGITAL AIR SHUTOFF".
34. Assemble the Box Assembly to the frame rail using the four 2A-0762 Bolts and four 114-6658 Washers to the frame rail in the location modified in the Base Modification section.
35. Program digital input number 6