SUPPORT AS-FRONT 9V7749 - Caterpillar

1. Drill two 12.7 mm (.50 in) diameter holes in the 2U6291 Bracket using the dimensions in the illustration.
Location of the two 12.7 mm (.50 in) diameter holes. (A) 64.0 mm (2.52 in). (B) 25.0 mm (1.00 in). (C) 60.0 mm (2.36 in). (D) 12.7 mm (.50 in) Diameter, two holes.2. Remove the grease fittings from the front of the steering cylinders. Install a 6K6967 Adaptor in each cylinder.3. Install a 2U4132 Elbow in each adapter.4. Install two 4U1697 Adaptors and 5B3254 Nuts in the modified 2U6291 Bracket. Install a 7K9197 Elbow in the right 4U1697 Adaptor on the bracket.5. Install a 3B8489 Grease Fitting in each adaptor.6. Connect the 2U9995 and 2U9996 Hose Assemblies from the adapters in the steer cylinders to the adaptors in the modified 2U6291 Bracket. Route the hose assemblies along the steer lines and use tie wraps to hold the hose assemblies to the steering lines.