9Y9619 SUPPORT Caterpillar parts
572R, 572R II, D6H, D6H XL, D6H XR, D6R, D6R II, D7H, D7R, D7R II
Rating:
Alternative (cross code) number:
CA9Y9619
9Y-9619
9Y9619
CA9Y9619
9Y-9619
9Y9619
Weight: 13 pounds 6 kg.
PIPELAYER, TRACK-TYPE TRACTOR,
Compatible equipment models: 9Y9619:
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195023
Turn the fuel supply valve to the OFF position.
Disconnect harness assembly (1) .
Remove fuel pressure sensor (2) from the fuel filter base.
Remove the O-ring seal from fuel pressure sensor (2) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01195023
Install a new O-ring seal on fuel pressure sensor (2) .
Install fuel pressure sensor (2) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect harness assembly (1) .
Turn the fuel supply valve to the ON position.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01195023
Turn the fuel supply valve to the OFF position.
Disconnect harness assembly (1) .
Remove fuel pressure sensor (2) from the fuel filter base.
Remove the O-ring seal from fuel pressure sensor (2) .Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01195023
Install a new O-ring seal on fuel pressure sensor (2) .
Install fuel pressure sensor (2) and tighten to a torque of 10 2 N m (89 18 lb in).
Connect harness assembly (1) .
Turn the fuel supply valve to the ON position.
Cat SIS web machinery list:
Parts support Caterpillar catalog:
1574430
SUPPORT
235C, 554, D6H, D6H XL, D6H XR, D6R
235C, 554, D6H, D6H XL, D6H XR, D6R
1688588
SUPPORT AS
D7R II
D7R II
3435540
SUPPORT AS
D7R II
D7R II
3533130
SUPPORT
D7R II
D7R II
3533131
SUPPORT-REAR
D7R II
D7R II
6T6985
SUPPORT
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
6T6984
SUPPORT
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
9G7756
SUPPORT
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
4T3581
SUPPORT
D5H
D5H
4T6175
SUPPORT-EDGE
D5H, D6M
D5H, D6M
8E9502
SUPPORT
D5H, D5H XL, D5R LGP, D6M, D6N
D5H, D5H XL, D5R LGP, D6M, D6N
7W6198
SUPPORT AS
D6H, D6H XL, D6H XR
D6H, D6H XL, D6H XR
2529615
SUPPORT
D6H, D6H XL, D6H XR, D6R
D6H, D6H XL, D6H XR, D6R
4W9894
SUPPORT AS
D6H, D6H II, D6H XL, D6H XR
D6H, D6H II, D6H XL, D6H XR
4W9895
SUPPORT AS
D6H, D6H II, D6H XL, D6H XR
D6H, D6H II, D6H XL, D6H XR
8N5094
SUPPORT AS-ENGINE
545, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 972G, D6H, D6H XL, D6H XR, D6R
545, 814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, 972G, D6H, D6H XL, D6H XR, D6R