SUPPRESSION GP-SOUND 2441371 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Guide Bolt
3/8-16 by 14 in     2    
- Nut
3/8-16     2    
- Washer     2    
Illustration 1 g01446289
Install relief spool (6). Install O-ring seal (5) .
Illustration 2 g01446252
Illustration 3 g01446251
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (4). Install plate (3) onto Tooling (A). Install Tooling (A) into the relief valve and tighten the nuts.
Illustration 4 g01446193
Illustration 5 g01446192
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Once plate (3) is seated, remove one part of Tooling (A) and install one bolt (2). Remove Tooling (A) and install the remaining bolt (2). Tighten bolts (2) to a torque of 47 9 N m (35 7 lb ft).
Illustration 6 g01446172
Install O-ring seal (1) .End By: Install the relief valve. Refer to Disassembly and Assembly, "Relief Valve (Torque Converter Inlet) - Install".