SUSPENSION GP-SEAT 2308795 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Connectors for the Electronic Control Module (ECM)
Illustration 1 g03791065
(1) Harness side P1 connector
(2) ECM P1 connector
(3) ECM P2 connector
(4) Harness side P2 connector
Illustration 2 g03795357
(1) Harness side P1 connector
(4) Harness side P2 connector
(5) Lever
(6) Slide
Disconnect either P1 connector using the following steps.
Rotate lever (5) to move slide (6) to release the connectors.
Lightly pull the connector away from the ECM.
Connect the P1 or P2 connector using the following steps.
Align the connector to the ECM.
Rotate lever (5) to move slide (6) to secure the connector to the ECM.Customer Connectors
Service Tool Connector
Illustration 3 g03791233
(1) Service connector
(2) 70-pin customer connectorInjector Connector
Connector at the Injector
Illustration 4 g03712954
Typical injector
Sensor Connectors
Analog Sensor Connector (Active)
Illustration 5 g01240891
Illustration 6 g03791279
Illustration 7 g03791417
Typical example of the pressure/temperature sensor connectors
Analog Sensor Connector (Passive)
Illustration 8 g03376197Engine Speed/Timing Connector
Illustration 9 g06172140Connectors for the Termination Resistor
Illustration 10 g01355248