2848016 SUSPENSION GP-REAR Caterpillar parts
793D
Rating:
Alternative (cross code) number:
CA2848016
284-8016
2848016
CA2848016
284-8016
2848016
Weight: 1150 pounds 521 kg.
TRUCK,
Compatible equipment models: 2848016:
Number on catalog scheme:
15
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the seat assembly. Refer to the Disassembly and Assembly, RENR2808, "Seat - Remove and Install".
Hydraulic oil pressure can remain in the hydraulic systems after the engine and pump have been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic systems. To prevent possible injury, refer to the section, Testing and Adjusting, "Hydraulic System Pressure - Release" before any fitting, hose or component is loosened, tightened, removed or adjusted.When possible, the bucket or attachment must always be lowered to the ground before service is started. When it is necessary for the boom to be in the raised position while tests or adjustments are done, be sure that the boom, stick and bucket or attachment have correct support.The swing lock (if equipped) must be engaged before service is started.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove all the floorplates and panels in the cab.
Illustration 1 g00709564
Remove clip (1) and pin (2) in order to remove the control linkage (3) for the blade.
Illustration 2 g00709565
Move the control linkage (3) out of the way by removing bolt (4) and bolt (5) .
Illustration 3 g00709566
Disconnect the 10 hydraulic hoses (6) that are connected to the side of the swivel. Mark each hydraulic hose with the port number from the swivel.
Illustration 4 g00709567
Remove the four larger bolts (7). The bolts are located under the machine.
Remove the smaller bolts (8) in order to remove the plate (9) .
Illustration 5 g00709568
Remove the 10 hydraulic hoses (10) from the round portion of the swivel.
Remove the swivel from the bottom of the machine.
Start By:
Remove the seat assembly. Refer to the Disassembly and Assembly, RENR2808, "Seat - Remove and Install".
Hydraulic oil pressure can remain in the hydraulic systems after the engine and pump have been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic systems. To prevent possible injury, refer to the section, Testing and Adjusting, "Hydraulic System Pressure - Release" before any fitting, hose or component is loosened, tightened, removed or adjusted.When possible, the bucket or attachment must always be lowered to the ground before service is started. When it is necessary for the boom to be in the raised position while tests or adjustments are done, be sure that the boom, stick and bucket or attachment have correct support.The swing lock (if equipped) must be engaged before service is started.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove all the floorplates and panels in the cab.
Illustration 1 g00709564
Remove clip (1) and pin (2) in order to remove the control linkage (3) for the blade.
Illustration 2 g00709565
Move the control linkage (3) out of the way by removing bolt (4) and bolt (5) .
Illustration 3 g00709566
Disconnect the 10 hydraulic hoses (6) that are connected to the side of the swivel. Mark each hydraulic hose with the port number from the swivel.
Illustration 4 g00709567
Remove the four larger bolts (7). The bolts are located under the machine.
Remove the smaller bolts (8) in order to remove the plate (9) .
Illustration 5 g00709568
Remove the 10 hydraulic hoses (10) from the round portion of the swivel.
Remove the swivel from the bottom of the machine.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts suspension Caterpillar catalog:
2706889
SUSPENSION GP-REAR
770, 772
770, 772