SUSPENSION GP-FRONT 2907232 - Caterpillar

Illustration 2 g01625816
Parts from the 231-2307 Torque Converter Gp that will not be reused (1) 235-2415 Clutch Housing (2) 1T-0847 Lock Pin (3) 304-8401 Stator Adapter (4) 1T-0895 Retaining Ring (5) 1T-1617 Retainer Plate (6) 6V-3823 Bolt (7) 132-4457 Cover (8) 1T-1616 Spring Washer (9) 6V-9191 Ball Bearing (10) 1T-1356 Seal Ring (11) 128-7348 Hub (12) 127-1001 Output Shaft (13) 6V-4248 Bolt
Refer to Illustration 1 and Illustration 2. Disassemble the torque converter. Clean the torque converter. Torque converter components that are listed in Illustration 1 and Illustration 2 will not be reused.
Illustration 3 g01625818
322-5504 Torque Converter Gp (14) 9S-4185 O-Ring Plug (15) 8L-2786 O-Ring Seal (16) 6Y-0799 Clutch Housing Assembly (17) 6V-1820 Bolt (18) 6V-5839 Washer (19) 2G-8741 Metal Seal Ring (20) 6Y-0798 Cover (21) 1T-0807 Thrust Bearing Race (22) 1T-0806 Bearing Retainer (23) 1T-0786 Thrust Bearing (24) 6Y-1354 Hub (25) 133-6589 Stator Adapter (26) 172-0084 Spacer (27) 322-5505 Output Shaft
Illustration 4 g01625820
Parts that are required to build 322-5504 Torque Converter Gp (14) 9S-4185 O-Ring Plug (15) 8L-2786 O-Ring Seal (16) 6Y-0799 Clutch Housing Assembly (17) 6V-1820 Bolt (18) 6V-5839 Washer (19) 2G-8741 Metal Seal Ring (20) 6Y-0798 Cover (21) 1T-0807 Thrust Bearing Race (22) 1T-0806 Bearing Retainer (23) 1T-0786 Thrust Bearing (24) 6Y-1354 Hub (25) 133-6589 Stator Adapter (26) 172-0084 Spacer (27) 322-5505 Output Shaft
Refer to Illustration 3 and Illustration 4. Use the new components that are listed in Illustration 3 and Illustration 4 in order to reassemble the torque converter .Note: Torque converters with serial numbers TCR1-865 should already have the 133-6589 Stator Adapter. Verify the part number of the stator adapter by removing the 1T-0795 Retaining Ring and the 1T-0787 Plate from the impeller side of the stator. The part number should be marked on the face of the stator adapter underneath the plate. If the adapter is a 133-6589 Stator Adapter, reinstall the 1T-0795 Retaining Ring and the 1T-0787 Plate and continue the repair procedure. If the adapter is not the 133-6589 Stator Adapter, continue with the disassembly and replacement of the stator adapter.
Reinstall the torque converter into the machine.The improvements to the torque converter are adaptable to (S/N: BXY1-2498), (S/N: 2TW1-UP), and (S/N: BNH1-UP).The improvements to the torque converter are effective in production with (S/N: BXY2499-UP).