SUSPENSION GP-FRONT 9J5476 - Caterpillar

Drill and tap ten holes (10) .
Illustration 28 g01912633
(11) 1/2 X 13 UNC (12) 3/8 X 16 UNC (X) 1005 mm (39.60 inch) (Y) 310 mm (12.20 inch) (Z) 288 mm (11.35 inch) (AA) 25 mm (1.0 inch) (AB) 409 mm (16.10 inch) (AC) 501 mm (19.70 inch) (AD) 100 mm (3.95 inch) (AE) 435 mm (17.10 inch) (AF) 395 mm (15.50 inch) (AG) 335 mm (13.20 inch) (AH) 295 mm (11.60 inch) (AJ) 22 mm (0.90 inch)
Drill and tap two holes (11) .
Drill and tap three holes (12) .
Cut out section (13) and section (14).
Table 7
Item     Dimension    
W2    
5 mm (0.20 inch) Fillet Weld    
Illustration 29 g01912693
(15) Lug (16) 8 mm (0.30 inch) (AK) 50 mm (20. inch) (AL) 50 mm (20. inch) (AM) 16 mm (0.60 inch) (AN) 10 mm (0.40 inch) (AP) 25 mm (1.0 inch) (AQ) 110 mm (4.30 inch)
Manufacture lug (15). Refer to Illustration 29.
Illustration 30 g01912694
Top view (15) Lug (AR) 25 mm (1.0 inch) (AS) 50 mm (2.0 inch)
Illustration 31 g01912695
Side view
Weld lug (15) manufactured in Step 20 in three places. Refer to Illustration 30, Illustration 31 and Table 7.
Illustration 32 g01901316
(2) Plunger (17) 324-1853 Cover (18) 324-1860 Hinge (19) 324-1856 Cover (20) Socket
Install 324-1853 Cover (17), two 324-1860 Hinges (18) and 324-1856 Cover (19) .
Install plunger (2) that was retained in Step 7.
Install sockets (20) that were retained in Step 5
Illustration 33 g01894734
(3) 302-1197 Fender (4) 302-1198 Fender
Illustration 34 g01914816
Install Tooling (A) and a suitable lifting device to fender (3). The weight of fender (3) is approximately 36 kg (80 lb).
Install fender (3) .
Repeat Step 25 for fender (4) .
Install fender (4) .
Illustration 35 g01901334
Remove handholds (21) and discard.
Illustration 36 g01901353
(22) 321-4758 Handrail (23) 321-4739 Handrail (24) 321-4767 Handrail (25) 321-4745 Handrail (26) 321-4753 Handrail (27) 321-4764 Plate
Install Item (22) through Item (27) .